Auto Shut-Off; Cleaning & Maintenance - REVAMP Professional TO-1500 Manual Del Usuario

hair. For tighter, bouncier curls, take smaller sections of hair. For loose, free-flowing
waves, take larger sections of hair.
• Release the hair by sliding the Perfect Endings switch. This retracts the bristles and
allows you to remove the waver smoothly and effortlessly from your hair. To 'set' the
curl, do not comb or brush hair until it cools.
• Repeat this around the head to create as many curls, waves or movements as desired.
• After use, switch off the waver, unplug, place on the stand and allow to cool before
storing away.
Follow us on www.revamphair.com for the latest hair tips and advice.
Please note:
• This is a high-performance product, avoid frequent use to prevent hair damage.
• Regular use of styling products may deteriorate the coating.
• Do not scratch the surface of the product as this will deteriorate the effectiveness of
the coating.
• The product reaches a very high temperature during operation, please style with
caution when using. Make sure to keep away from the scalp and skin to avoid burns.

AUTO SHUT-OFF

This appliance has an automatic shut off feature for added safety. If the appliance is
switched on for more than 72 minutes continuously, then it will automatically switch off. If
you wish to continue using the appliance after this time, press the power button to switch
on. Use the temperature control to select your desired temperature.
This feature should not be considered as a substitute for 'OFF'. ALWAYS REMEMBER TO
SWITCH THE APPLIANCE OFF AND UNPLUG FROM THE MAINS WHEN NOT IN USE.
PLUG (TO-1500-GB ONLY)
This unit comes with a removable UK 3-pin
plug. The 3-pin plug can be removed to
reveal a European 2-pin plug by unscrewing
the centre screw, lifting the rear cover and
unclipping the European 2-pin plug. It can
be replaced if necessary, by reversing this
procedure. If required replace plug fuse
with one the same value
If the plug on this appliance is damaged, it can be replaced with a BS 1363 plug, fitted
with a BS 1362 fuse. Please use the same value of fuse supplied. Care must be taken when
changing the plug. If in doubt, contact a qualified electrician.
CLEANING & MAINTENANCE
• Switch the appliance off, unplug from the mains and allow to cool fully before
cleaning.
• Wipe over all surfaces using a soft damp cloth. Do not use harsh abrasives or cleaners.
• Do not immerse the appliance in water or and other liquid.
• Ensure all parts are dried thoroughly with a soft towel before reusing.
• To prevent cord damage, do not wrap the cord around the appliance, always store the
cord loosely next to the appliance.
• Store in a cool dry place.