Installation; Attaching The Unit To The Wall - Glacier bay 5348WWHD Guía De Uso Y Cuidado

[Heading goes here]

Installation

15

Attaching the unit to the wall

NOTE: It is imperative that the unit be fastened to the wall
for safety reasons.
NOTE: Before cutting, drilling, or hammering into any wall
surface, verify the location of electrical, plumbing, and gas
lines. Cutting any of these may cause serious injury.
□ Place the unit in the desired location and mark the location
on wall through the mounting holes on the hanging rail (H).
□ Carefully move the unit aside and drill holes in the marked
spots on the wall. Note, if the mounting screws (QQ) will not
be going directly into studs, insert the wall anchors (RR).
□ Mount the unit to the wall, using the spacers (SS) and
mounting screws (QQ), as shown. Note, if spacers (SS) are
not needed, use the washer (TT) in their place.
QQ
21
Please contact 1-855-HD-GLACIER for further assistance.
H
SS
HOMEDEPOT.COM/GLACIERBAY