Starrett 795XFL Guía De Usuario página 5

Test Mode:
If you should see some unusual readings on the display, you may have inad-
vertently entered the TEST mode, which is for the evaluation of the electron-
ics by a trained technician. To exit the Test Mode, press the ZERO/ABS button
several times until all display segments are on. Next, press 'any other' button
to get back to the normal mode.
Care and Maintenance:
It is important to wipe the micrometer with a lint-free cloth after exposure
to moisture. Apply a very light coat of lubricant on all the mechanical parts.
Do not use aggressive solvents to clean the plastic components.
Do not store the instrument in areas of extreme temperature.
Do not mark the tool with an electric marking pen as this may damage the
tool.
The spindle is designed not to be removed from the tool and should not be
rotated more than one revolution past the limits of its measuring range as
this may result in damage to the tool.
Resolution:
Accuracies:
Micrometers with English Threads
±0.0001/0.003mm
±0.00015/0.004mm
Micrometers with Metric Threads
±0.002mm/.0001"
±0.003mm/.0001"
±0.004mm/.00015"
Specifications:
0.00005" and 0.001mm in both the regular and
"ME" series
0.001mm for the metric only series
0-1"/0-25mm
1"-2"/25-50mm
2"-3"/50-75mm
3"-4"/75-100mm
0-25mm/0-1"
25mm-50mm/1"-2"
50mm-75mm/2"-3"
75mm-100mm/3"-4"
5