Basic Operation - Tripp-Lite AVRX550U Guia De Inicio Rapido

Installation
1
Unplug the computer's power cord from both your
AC outlet and the computer's AC input. Insert the
C13 connector of the computer's cord
UPS's AC input. Insert the plug of your computer's
cord into your AC outlet. Insert the C13 connector
of the power cord that came with your UPS
the computer's AC input. Insert the UPS cord's C14
connector into any of your UPS's battery backup C13
output receptacles.
2
Plug remaining equipment into the UPS.
3
Push the ON/OFF/TEST button for one second to turn
the UPS on. Please Note! The UPS will not turn on
automatically in the presence of live utility power.
Note: The UPS will not turn on automatically in the
presence of live utility power.

Basic Operation

ON/OFF/TEST
Button
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
18-08-423-932975-EN-ES-FR-RU-DE-V2.indd 3
ON/OFF OVERLOAD/
LED CHECK BATTERY
LED
Communications Port
(Select models only. For use with
included USB or DB9 cable.)
Tripp Lite has a policy of continuous improvement.
Product specifications are subject to change without notice.
into your
A
into
B
1
2
3
Battery Backup/ Surge-Only
Surge Protected Protected
Outlets Outlets
Resettable Circuit
Breaker Connection
3
Tel/DSL Jacks
(Select Models Only)
Ground
12/17/2018 6:53:27 PM