en
1. Product Identification
2. Symbols
Consult Instructions for Use
Caution
Do not allow liquid to enter
mains input socket
Inlet filter
Outlet filter
3. Introduction
These compressor nebuliser systems are designed to deliver a fine aerosol mist from the liquid medication prescribed
by your doctor to treat your respiratory condition.
Use according to the instructions given by your doctor or physician.
Please read the instructions carefully to obtain the maximum benefit from the compressor nebuliser systems.
The compressor nebuliser systems are approved for the following environmental / ambient conditions for
transportation, use and storage purposes:
3.1 Storage
The machine should be stored in a dust and smoke-free area.
Recommended:
RH:
Pressure:
WARNING: Do not use compressor nebuliser systems near active high frequency surgical equipment or
2
1. Outlet filter
2. Inlet filter
3. Mains switch
4. On
-25˚C
- +70˚C
15%
- 90%
700hPa - 1060hPa
electro-magnetic equipment.
5. Off
6. Fuse (T1AL 250V)
7. Hard wired lead
Fuse (T1AL 250V)
Class II Equipment
Type BF Equipment
Do not dispose of with household refuse