Starter Kit; Notes On Compressor Nebuliser Care; Operating Instructions; Operating Temperature - MEDIX AC2000 Manual Del Usuario

4. Starter kits
are supplied with the AC2000 and Econoneb containing:
1 x medication chamber
1 x inlet filter
1 x mouthpiece
1 x child face mask
The Turboneb 2 is not supplied with a starter kit.
The Turboneb 2 supplies the highest flow rate for nebulising viscous antibiotics and has been designed to operate
from mains voltage. Two versions are available, UK and EURO, (i.e. plug type) both 220-240V /50Hz.
This compressor-only unit provides flexibility for the user to choose the most appropriate accessories for
demanding applications.
Note:
• All MEDIX compressor nebulisers are continuously rated for repetitive use.
Please refer to the information label on the machine to establish that you have the correct voltage for your
mains supply.
• The parts listed above are required for correct function of these compressor nebulisers and must be in
compliance with EN 13544-1.

5. Notes on Compressor Nebuliser Care

Caution
1. Do not immerse machine in water.
2. Physician prescribed use only.
3. Never use more frequently than prescribed.
4. If therapy is having no effect, consult physician.

6. Operating Instructions

Operating Temperature:

Recommended: +5˚C
RH: 15%
Pressure: 700hPa - 1060hPa
1. Carefully withdraw compressor nebuliser from the box.
2. Connect mains lead to a mains power supply.
3. Connect driveline to outlet filter nozzle.
4. Connect nebuliser chamber, followed by mouthpiece or face mask, to the driveline.
5. Press mains switch on ( I ). The switch will illuminate, check airflow before each use.
6. The equipment can now be operated.
(Mains Operated)
- +40˚C
- 90%
1 x driveline
1 x filter spanner
1 x adult face mask
en
3