Installation. Assembly And Adjustment - COPELE EQUIMATIC Manual De Instrucciones

8.- INSTALLATION. ASSEMBLY AND ADJUSTMENT.

The machine is directly placed on the truck platform, where it will be carried to the customer
premises. It will be stowed in a proper way to prevent any movement during transport.
Upon receipt of the machine, check that no damages have occurred during transport. Check
that the supplied material matches the specifications of the ordered unit. If there is any missing part
or damages are found, details must be reported right away to the carrier and the manufacturer.
Place the machine as close as possible to the place of installation to avoid any danger during
unloading operations.
Cautiously check for damages and waste of any kind that could have accidentally entered
control devices or operation areas.
Carry out the first cleaning of the machine, eliminating dust and foreign substances. If any
packing was used for transport, the recipient is in charge of disposing of it and eliminating it in
accordance with the rules in force in the corresponding country.
To carry out all of the operations that are described here, the machine will be disconnected
from the electrical supply.
There are two models of the unit and their installation is slightly different.
•
Equimatic model.
•
Equimatic Duplo model.
INSTRUCTION MANUAL
INSTALLATION
ASSEMBLY AND
ADJUSTMENT
Page 17 of 29