Installation
•
Place the appliance on a dry, level, waterproof and heat-resistant surface.
•
The power outlet must be easily accessible in order to disconnect the
device from the power circuit quickly in an emergency.
•
Do not install or position this unit in a bookshelf, built-in cupboard, or
other confined space. Ensure good ventilation of the appliance.
•
Do not place the product on top of an amplifier or other device that may
become hot. This heat could damage the product.
•
Do not expose this product to direct sunlight, high temperatures, excessive
moisture, or excessive vibration.
AC adapter
•
The mains adapter can be operated with 220 240 V alternating current.
•
However, use a suitable plug adapter if the plug does not fit into the mains
socket.
Intended use
This device is designed for dry spinning garments. It is designed exclusively
for this purpose and may only be used for this purpose. It may only be used in
the manner described in this manual. This appliance is not intended for use by
persons (including children) with impaired physical, sensory or mental abilities
or for lack of experience and/or knowledge, unless they are supervised or
instructed by a person responsible for their safety how to use this appliance.
Children should be supervised to ensure that they do not play with the device.
Transporting the appliance
Please keep the original packaging. To ensure adequate protection during
transport, pack the unit in its original packaging.
EN
15