Specifications; Accessories - Toa WM-D5200 Manual De Instrucciones

Micrófono inalámbrico digital
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

10. speciFications

Microphone Element
Modulation type
Version and
Frequency Range
Channel Selectable
RF Carrier Power
Maximum Input Level
Audio Frequency
Response
Antenna
Dynamic Range
ID Selectable
Battery
Battery Life
Operating Temperature
Operating Humidity
Finish
Dimensions
Weight
note:
The design and specifications are subject to change without notice for improvement.

• Accessories

Storage case ........................................................... 1
Screw driver (for setting) ......................................... 1
Microphone holder .................................................. 1
note
The WM-D5200 cannot communicate with the TRANTEC Wireless System (S4 and S5 Series) nor
with the TOA Analog Wireless System (WT-5800, WT-5805, and WT-5810 etc.).
Electret condenser unit: Unidirectional
WM-D5200 -C4, -C7: 794 – 832 MHz
WM-D5200 -G1:
WM-D5200 -H1:
160 channels
(The number of channels may differ from country to country.)
132 dB SPL (Sensitivity: L)/122 dB SPL (Sensitivity: H)
Typ. 90 dB (when used with WT-D5800)
WB-2000 rechargeable battery (option) or AA Alkaline dry cell battery
–10 to +50 °C (14 to 122 °F) (except battery)
FSK
(794 – 806 MHz for Thailand)
606 – 636 MHz
576 – 606 MHz
Less than 50 mW
100 Hz – 12 kHz
Built-in type
10 patterns
Approx. 8 hours
30 to 85 %RH (no condensation)
Body: ABS resin, black, coating
Head: steel, black, paint
ø47 × 239.5 mm (ø1.85" × 9.43")
220 g (0.49 lb) (with battery)
17

Publicidad

Tabla de contenido
loading

Tabla de contenido