Tecfrigo VIPR 33 Manual Del Usuario página 7

Consult a qualified electrician or service center if you do not completely understand the grounding
instructions. If doubts exist as to whether the appliance is properly grounded, have a qualified electrician
check the circuit to make sure the outlet is properly grounded.
• If the cable does not reach the nearest socket, either rearrange your store layout or ask a qualified
electrician to fix a new socket.
• If power is cut off, wait for at least 3 minutes before restart the unit to avoid damaging the compressor.
FIT GLASS PANELS
ATTENTION: RISK O F BREAKAG E OF THE GLASS PANEL
note:
Ensure the hole in the collar for the grub screw faces inwards.
note:
Ensure the screw hole furthest from the edge of the panel goes to the back of the appliance.
note: Ensure the soft end of the grub screw is the end making contact with the glass.
note: Ensure the short end of the bolt assembly is on the outside of the panels.
note: The glass panel must not be used as shelf.
• Unpack the wooden/carton box carefully; it's recommended to do this work with two people.
• Screw the collars to the rim of the appliance.
• Slot the two side panels into the collars, with the holes in the glass at the top.
• Screw a grub screw into each collar to secure the panels.
• Slot the rear panel into the collars, with the holes in the glass at the top.
• Screw a grub screw into each collar to secure the panel.
• Slot the plastic bushes into each of the holes.
• Screw the brackets to the inside of each panel using the bolt assemblies.
• Place the top panel onto the brackets, ensuring all holes line up.
• Insert the bush and attach the top panel to the brackets with the bolt assemblies.
INSTALLATION
Glass Panel Assembly Guide
English
7