Connecting The Cables - ETI 53182201 Manual De Uso Y Cuidado

Mount to 5 in./6 in. Housing with C-Clamps (continued)
3
Connecting the socket adapter
□ Screw the medium base (E26) socket adapter (B) into the
socket in the recessed housing .
B
5
Inserting the spring clips into the
recessed can
□ Compress the spring clips on the LED light module
(A) and insert into the C-Clamps on the inside of the
recessed can housing .
4

Connecting the cables

□ Plug the cable connector on the socket adapter (B) into the
connector on the LED light module (A) .
6
Pushing the LED light module into
the recessed can
□ Carefully push the LED light module (A) into the recessed
can housing until the trim is flush with the ceiling surface .
4
Please contact 1-855-384-7754 for further assistance .
A
WWW .ETISSL .COM