Steren RM-12 Manual De Instrucciones página 5

LOCK / UNLOCK DEVICES
Use this option to restrict the use of certain devices.
1.- Press and hold SET for 3 seconds, in the screen you will see
the message CODE SETUP.
2.- Use the multi-control to choose DEVICE SET option. Then
press SELECT.
3.- Select the device you want to block. You will see it in the
screen.
4.- Use the multi-control button, Up or Down, to choose the DEV
LOCK option.
5.- Press SELECT to store the changes in memory. If the pro-
cess is correct, the word SUCCESS displays in the screen.
If you want to unlock the device, repeat steps from 1 to 3, If you want to unlock the device, repeat steps from 1 to 3,
and choose DEV UNLOCK option. and choose DEV UNLOCK option.
MACRO
This option allows you to program a playback sequence. With
the touch of one button, you will turn the TV on, change a
channel and volume up.
Example: Example:
Choose TV, turn it on, change to channel 2, and volume up Choose TV, turn it on, change to channel 2, and volume up
in two levels (5 steps). in two levels (5 steps).
1.- Press SET for 3 seconds, CODE SETUP is displayed in the
screen.
2.- Use the multi-control button to choose MACRO SET option,
then press SELECT to confi rm it.
3.- Use the multi-control button to choose Macro 1 option.
4.- Press SELECT to enter Macro mode, you will see the used
steps (Key X).
5.- Press TV1 button (or where your TV is programmed) (Step 1).
6.- Press POWER button (Step 2).
7.- Press number 2 (Step 3).
8.- Press Volume up button, twice (Step 4 and 5).
9.- After the button sequence, press MACRO, in order to save
the program in memory, the word SUCCESS displays in the
screen and the process will be completed.
10.- To start the sequence, press MACRO, once.
ENGLISH-5