Guarantee & Service; Troubleshooting - Philips RI2800 Serie Manual Del Usuario

EnglISh
14
guarantee & service
If you need service or information or if you have a problem, please visit
the Philips website at www.philips.com.br or contact the Philips
Consumer Care Centre in your country (you find its phone number in
the worldwide guarantee leaflet). If there is no Consumer Care Centre in
your country, go to your local Philips dealer.

troubleshooting

This chapter summarises the most common problems you could
encounter with the appliance. If you are unable to solve the problem with
the information below, contact the Consumer Care Centre in your
country.
Problem
The iron is
plugged in, but
the soleplate is
cold.
The iron does
not produce any
steam.
4239.000.7100.1.indd 14
Cause
There is a
connection
problem.
The temperature
dial is set to MIN.
There is not
enough water in
the water tank.
The steam control
is set to position 0.
Solution
Check the mains cord, the plug
and the wall socket.
Set the temperature dial to the
required position.
Fill the water tank (see chapter
'Preparing for use', section
'Filling the water tank').
Set the steam position to $
or & (see chapter 'Using the
appliance', section 'Steam
ironing').
15-12-09 16:53