Product Description; Installation - Klarstein 10029819 Manual De Instrucciones

Model 10029819
1 Handle
2 Door
3 Shelf
4 Condenser
5 Cabinet
6 Leveling leg
Model 10029820
7 Door
8 Handle
9 Digital control panel
10 Shelves
11 Half Shelf
12 Condenser
13 Leveling leg
Befor Installation (Built-in)
• Remove all exterior and interior packing.
• Before connecting the Wine Cooler to the power source, let it stand upright for approximately 2 hours. This
will reduce the possibility of a malfunction in the cooling system caused by handling during transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
• The door on this appliance can be opened from either the left or the right side. The unit is delivered with the
door opening on the left side.

Installation

• The appliance is designed to be built-in the kitchen cabinets.
• The appliance should be positioned in a well-ventilated, dry room.
• Place your Wine Cooler on a position that is strong enough to support it when it is fully loaded. To level your
Wine Cooler, adjust the front leveling legs at the bottom of the Wine Cooler.

Product Description

Installation
14