Klarstein 10029819 Manual De Instrucciones página 21

Humidity Control (Optional)
The wine cooler is equipped with a system for maintai-
ning the correct level of humidity. Fill the small plastic
reservoir (humidity box) ¾ full with water, and fit onto the
runners found on the top shelf of the wine cooler. Check
the water level regularly and refill as necessary. Please en-
sure the reservoir is positioned correctly on the runners
on the top shelf to avoid the possibility of water spillage.
Cleaning Your Wine Cooler
• Turn off the power, unplug the appliance, and remove all items including shelves and rack.
• Wash the inside surfaces with a warm water and baking soda solution. The solution should be about 2 tab-
lespoons of baking soda to a pint of water.
• Wash the shelves with a mild detergent solution.
• Wring excess water out of the sponge or cloth when cleaning any area of the controls.
• Wash the outside cabinet with warm water and mild liquid detergent.
• Rinse well and wipe dry with a clean soft cloth.
Vacation Time
• Short holidays: Leave the Wine Cooler in operation for holidays of less than three weeks.
• Long absences: If the appliance will not be used for several months, remove all items, turn off the appliance and
unplug. Clean and dry the interior thoroughly. To prevent odour and mold growth, leave the door open slightly:
blocking it open if necessary.
Moving Your Wine Cooler
• Remove all items.
• Securely tape down all loose items (shelves) inside your appliance.
• Turn the adjustable leg up to the base to avoid damage.
• Tape the door shut.
• Be sure the appliance stays secure in the upright position during transportation. Also protect outside of
appliance with a blanket, or similar item.
Energy Saving Tips
• The Wine Cooler should be located in the coolest area of the room, away from heat producing appliances,
and out of the direct sunlight.
• Ensure that the unit is adequately ventilated. Never cover air vents.
• Only open the door for as long as necessary.
21