Troubleshooting - Honda Power Products WB20XT Manual De Explicaciones

10. TROUBLESHOOTING

When the engine will not start:
1. Is there enough fuel?
2. Is the fuel valve ON?
3. Is gasoline reaching the carburetor?
To check, move the fuel valve lever to the ON position and loosen
the carburetor drain screw by turning 1 to 2 turns counter clockwise.
If any fuel is spilled, make sure the area is dry before starting the
engine. Spilled fuel or fuel vapor may ignite.
DRAIN SCREW
4. Is the engine switch ON?
5. Is there enough oil in the engine?
6. Is the spark plug in good condition?
Remove and inspect the spark plug. Clean, readjust gap and dry the
spark plug. Replace it if necessary.
7. If the engine still does not start, take the pump to your servicing
dealer.
28
WASHER
FUEL VALVE LEVER
ON