Smart Functions; Smart Diagnosis™ Function - LG DF20WKSE Manual Del Propietário

Smart Diagnosis™ Function
Should you experience any problems with the
appliance, it has the capability of transmitting data via
your telephone to the LG Customer Information Center.
NFC or Wi-Fi equipped models can also transmit data to
a smartphone using the LG Smart ThinQ application.
Smart Diagnosis™ through the Customer
Information Center
• For appliances with the
This gives you the capability of speaking directly to
our trained specialists. The specialist records the data
transmitted from the appliance and uses it to analyze
the issue, providing a fast and effective diagnosis.
1. Call the LG Electronics Customer Information Center.
2. HOLD the mouthpiece of your phone over the POWER
button, when instructed to do so by the call center,
no more than one inch from (but not touching) the
machine.
NOTE
Do not press any other buttons or turn the cycle
selector knob
3. PUSH and hold the Ultra Low button while continuing
to hold your phone to the POWER button.
4. Keep the phone in place until the tone transmission
has finished.
5. Once the countdown is over and the tones have
stopped, resume your conversation with the call
center agent, who will then be able to assist you using
the information transmitted for analysis.
NOTE
• Smart Diagnosis™ cannot be activated unless the
appliance can be turned on using the Power button. If
the appliance cannot be turned on, troubleshooting
must be done without using Smart Diagnosis™.
• For best results, do not move the phone while the
tones are being transmitted.
• If the call center agent is not able to get an accurate
recording of the data, you may be asked to try again.
• The Smart Diagnosis™ function depends on the local
call quality.
• Bad call quality may result in poor data transmission
from your phone to the call center, which could cause
Smart Diagnosis™ to malfunction.
or logo

SMArT FuNCTiONS

NOTE
• Smart Diagnosis™ cannot be activated unless the
appliance can be turned on using the Power button.
If the appliance cannot be turned on, troubleshooting
must be done without using Smart Diagnosis™.
41