Battery Installing/Replacement (C-Wfr) - Optika Italy C-WF Serie Manual De Instrucciones

7.4

Battery installing/replacement (C-WFR)

1. Unplug the power supply.
2. Unscrew the top cover ① of the battery compartment.
(Fig. 11)
3. Remove the battery holder and insert the 4 batteries
(respecting the polarities). (Fig. 12)
• In case of battery replacement, remove the exhausted
batteries and insert new ones.
4. Connect the battery pack to the connector in the battery
compartment. (Fig. 13)
5. Insert the battery pack into the compartment and screw
in the top cover.
Page 9
①
F ig. 11 F ig. 11
F ig. 12 F ig. 12
F ig. 13 F ig. 13