PULOX PO-200A SOLO Manual De Instrucciones página 27

manual/booklet
Pulse oxygen
%SpO2
saturation (%)
bpm Pulse rate (bpm)
Low battery
1. No finger inserted
2. An indicator of
signal inadequacy
Battery anode /
Battery cathode
10. Function Specification
Information
Pulse Oxygen Saturation (SpO2)
Pulse Rate ( PR )
Pulse Intensity (bar-graph)
Pulse wave
SpO2 Parameter Specification
Measuring range
Accuracy
Optical Sensor
Pulse Parameter Specification
Measuring range
Accuracy
Pulse Intensity
Range
Battery Requirement
1.5V (AAA size) alkaline batteries × 2
Battery useful life
Pulse sound on
Serial number
WEEE (2002/96/EC)
This item is compliant
with Medical Device
Directive 93/42/EEC of
June 14, 1993, a
directive of the
European Economic
Community.
International
IP22
Protection
Display Mode
OLED
OLED
OLED
OLED
0%~100%, (the resolution is 1%).
70%~100%:±2% ,Below 70%
unspecified.
Red light (wavelength is 660nm)
Infrared (wavelength is 880nm)
30bpm~250bpm, (the resolution
is 1bpm)
±2bpm or±2% (select larger)
Continuous bar-graph display,
the higher display indicates the
stronger pulse.
EN