Publicidad
Idiomas disponibles
Idiomas disponibles
Nomenclature Accessories:
Charger AC-5E
USB Charging Cable
❶ Charging plug
❷ USB plug
❸ Shutter plug
❹ AV plug
❺ Mini USB plug
How to use the Transmitter:
Loading the Batteries in Transmitter
1. Slide the battery compartment lid open.
2. Insert the supplied BL-6F rechargeable battery into the battery compartment.
3. Slide the lid onto the battery compartment until it clicks closed.
Note: The fully charged Li-Ion battery BL-6F will last about 500h in standby mode. If it is
in active use, it will last app. 6 h. When the battery is depleted, the function indicator will
blink. Now you need to recharge the battery using the supplied charger or replace the
battery against a freshly charged one.
Mount the Transmitter – 3 alternatives
• Slide the transmitter onto your camera's hot shoe and turn the mounting ring clockwise to
secure the transmitter. If you wish to remove the transmitter, turn the mounting ring
counter clockwise and slide the transmitter off the camera's hot shoe.
• In case your camera does not boast of a hot shoe or you are using other accessories on
the hot shoe, you can mount the transmitter on an accessory rail (optionally available
from DÖRR) using the transmitters incorporated ¼" tripod screw mount.
• Otherwise you can also mount the transmitter on a regular tripod with ¼" mount.
Connection of Transmitter with Camera
1. Make sure that the transmitter is firmly attached to your camera or tripod and
2. Open the remote release socket cover of your camera and plug in the
corresponding plug. The set comes with cables for various cameras. Select the
3. Now open the AV output cover and plug the AV plug in.
4. Connect the other end of the cable with the Mini USB
12
Please make sure to match the contacts between the battery and the transmitter.
that your camera is off power.
cable that fits your camera. For details please read your camera's instruction
manual.
socket of the transmitter.
Publicidad
