Dörr LV-WRC Manual De Instrucciones página 16

1. Connect the charger cord with the charging socket of transmitter or
receiver and mains supply. After about 4 seconds the charging indicator
starts blinking in green color.
- This indicator will not blink in case the transmitter or receiver are switched
off. However the charging process will work while the devices are off power.
2. When charging is completed, the indicator will glow in green color
permanently. Now the charger can be removed from the transmitter or receiver
and you can continue to take remote shots.
- Alternatively charging of the batteries can be done via computer using the
supplied USB charging cable. Connect it to a USB socket of your computer and
make sure that your computer is turned on during the whole charging process.
Specifications:
• Frequency:
• Modes:
• Range:
• Channels:
• LC-Display:
• Resolution:
• Well suited for:
• Power Source:
• Battery lasts:
• Measurements:
• Weight (w/o batteries): Transmitter: 34g, Receiver: 77g
Specifications are subject to change without notice.
16
2,4GHz and 433 MHz radio signals
single frame, continuous shooting (1frame/second), BULB mode, delayed shooting
app. 15m (will be reduced by obstacles between transmitter and receiver)
3 radio signal channels can be selected
3" TFT with adjustable brightness
960 x 240
cameras with AV output and remote release socket. (Only cameras with Live
View (LV) function). Adapter cables for various camera models are included.
2 x 3,7V 1,200mAh Li-Ion battery (batteries and charger included)
Standby Mode: Transmitter: 500h. Receiver: 500h
Operation: Transmitter: 6h, Receiver: 4h
Transmitter: 67 x 48 x 25,5mm, Receiver: 102 x 61 x 19mm