Uline H-1675 Manual Del Usuario página 4

1. The H-1675 will arrive with similar crating to what is shown
to the right. Please remove the protective packaging and
prepare the unit to stand up. (See Figure 2)
2. Once the machine has been successfully uncrated, the
next step is to begin erecting the tower. Start by leaning
the tower until fully upright. (See Figure 3)
caUTion: Heavy materials! Two or more
people are required for assembly.
3. Align the 5 bolts in the threaded inserts and tighten
completely. Next, the carriage will need to be
mounted to the tower. (See Figure 4)
caUTion: always have one or more people
supporting the tower while tightening bolts.
4. To mount the carriage, start by removing the bottom
4 bolts from the carriage mount bracket. (See Figure 5)
PAGE 4 OF 33
aSSembLY inSTRUcTionS
Figure 2
Figure 3
Figure 4
Figure 5
0913 IH-1675