of experience and knowledge.
♦ Make sure that dust, dirt or other foreign objects do not
block the fan grill on the appliance.
♦ Keep the appliance in good condition. Check that the
moving parts are not misaligned or jammed and make
sure there are no broken parts or anomalies that may
prevent the appliance from operating correctly.
♦ Never leave the appliance connected and unattended if
is not in use. This saves energy and prolongs the life of
the appliance.
Service:
♦ Any misuse or failure to follow the instructions for use
renders the guarantee and the manufacturer's liability
null and void.
DESCRIPTION
A Oscillation button
B Speed selection button
C Timer control knob
D Ventilation grill
E Front base
F Back base
If the model of your appliance does not have the accesso-
ries described above, they can also be bought separately
from the Technical Assistance Service.
INSTALLATION
♦ Be sure to remove all packaging material from inside the
appliance.
♦ Ensure that the fan is switched off from the supply mains
before start any installation or assembly operation.
♦ The appliance should be used with its base fitted.
Assembling the base:
♦ To fix the base into the appliance, place the appliance
face down.
♦ Fit the base with the column and secure it with the
screws provided (Fig.1).
♦ Stand the appliance up again so as to check that the
base works properly.
(Original instructions)
INSTRUCTIONS FOR USE
Before use:
♦ Make sure that all products' packaging has been
removed.
Use:
♦ Unroll the cable completely before plugging it in.
♦ Connect the appliance to the mains.
♦ Guide the appliance to direct the flow of air in the desired
direction.
♦ Turn the appliance on, by using the on/off button.
♦ Select the desired ventilation speed.
Timer function:
♦ The appliance's operating time can be controlled.
♦ To program the operating time simply select it using the
(C) knob (from 1min to 120min).
♦ After the selected time the appliance will switch off
automatically.
Oscillation function:
♦ The oscillation function makes it possible to direct the
flow from the apparatus so that it automatically alter-
nates over a range of 75º.
♦ To activate this function, press the (A) button.
♦ To deactivate this function, follow the procedure for
switching it on in reverse.
♦
Once you have finished using the appli-
ance:
♦ Turn the appliance off, using the on/off button.
♦ Unplug the appliance from the mains.
♦ Clean the appliance.
Carry handle/s:
♦ This appliance has a handle on the upper part of the
body, which facilitates comfortable transportation (Fig.2).
CLEANING
♦ Disconnect the appliance from the mains and allow it to
cool before undertaking any cleaning task.
♦ Clean the equipment with a damp cloth with a few drops
of washing-up liquid and then dry.
ENGLISH
5