Operation - Steren MUL-630 Manual De Instrucciones

OPERATION

Voltage measurement of AC (~) voltage, DC (---) voltage, Diodes ( ),
Resistance (Ω), Continuity ( ), Capacitance ( ), frequency (Hz) and duty
cycle.
1. Insert the red probe into the COM terminal and the black
within the HzVΩ terminal.
2. Set the rotary switch to the correct measurement.
3. Connect the probe with the object to be measured. The
value of the measurement will be displayed on the screen.
-For Capacitance/diode, turn the rotary switch to the
(diodes) position and press the SELECT button until the corresponding icon.
- Do to eliminate damage to the person or to the meter due to electrical shock please
not attempt to measure voltages above 1000 V.
-To eliminate damage to the meter or to the devices under test, disconnect circuit
power and discharge all high-voltage capacitors before testing resistance, continuity
and capacitance.
-For measuring high resistance (> 1 MΩ), is normal for the meter take several seconds
to stabilize the reading.
-If the LCD indicates 0 L circuit is open or the resistance exceeds the capacity of the
meter measurement.
-To measure the duty cycle, turn the switch to Hz and press Hz % until the % symbol
is displayed on the screen.
14
(capacitance) or