Security - Steren MUL-630 Manual De Instrucciones

SECURITY

- Your new STEREN multimeter is designed for use by engineers, technicians, and all those
who demand a device which is highly accurate, safe, portable, and easily used.
-Every testing position quickly and easily selected with a simple turn of the dial.
-Remember to periodically clean the testing points with a soft dry rag. Do not use any liquids,
abrasives, or solvents in order to clean the testing points.
-Before opening the multimeter's cover, make sure that the testing points are not connected
to any circuit.
-In order to avoid an electrical shock or damage to the multimeter, do not use it in wet areas.
- If this multimeter is used in areas with a high electromagnetic radio frequency, this frequency
could influence your readings.
- If this multimeter is used near devices that generate a lot of noise, the screen might become
unstable or indicate errors.
-Do not use the multimeter or the testing points if they are damaged.
-Do not operate this multimeter near dust, steam, or gas.
-When the range of the value to be measured is unknown, make sure to choose the highest
range or use the auto-range mode.
-In order to avoid damage, do not exceed the maximum values indicated in the specification
tables.
4