MTD 190-180 Manual Del Operador página 5

CONTENTS OF HARDWARE PACK
This grass collector kit is shipped with a hardware pack enclosed. This hardware pack may contain extra
parts for installation on a different rider from which you have. Please check your hardware pack against the
illustration below.
(2)
A1
(2)
A2
(2)
C1
(2)
C2
NOTE: Each item has been identified above for ease of assembly, and the letter code assigned here is maintained in
assembly instructions.
* The clevis pin (B1) and hairpin clip (B2) may come pre-installed in the hitch-plate assembly from the factory. In that
case it will not be included in the hardware pack, but pre-installed in the hitch-plate.
For decks with grass catcher pin
(1) not pre-installed
B1*
(1)
B2*
(8)
D1
(2)
D2
Figure 2-2

(1)
E1
(1)
E2
(#) = Quantity
2
Carton
Contents
If you are missing
any parts, please
do not contact the
retailer where you
purchased this unit,
call MTD directly at
1-330-220-4MTD or
toll free at
1-800-800-7310.
NOTE:
Each item has
been identified in
above for ease of
assembly, and the
letter code assigned
here is maintained
in assembly
instructions.
(#) = Quantity