How To Scan Slides; Step 1 - Aquire Driver; Step 2- Select Film Type; Step 3 - Optional Prescan - Reflecta RPS 10M CyberView X5 Manual Del Usuario

HOW TO SCAN SLIDES

STEP 1 – Acquire Driver
(For PC user)
open CyberView from start – all Programs –CyberView
(For maC user)
open macintosh Hard drive – applications –CyberView
STEP 2 – select Film Type
select the lm type to be scanned - Positive, negative or B&W (Black and White).
STEP 3 – Optional Prescan
select the "Prescan Current Frame" to prescan the slide currently loaded into the
scanner or "Prescan all.." to prescan an entire negative strip
Pre-scanning should be used to manually adjust color/edit settings for each slide
before doing the nal scan. it's possible to set di erent settings for each slide to
be scanned.
STEP 4 – set scan settings
a. resolution
the default scanning resolution is 1000dpi, additional resolution options
are listed below.
10