Surface Unit Radiant Hilight; Safety; How To Operate The Surface Unit - ROSIERES VG 40 Instrucciones De Instalación Y Empleo

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

The use of abrasive cleansers is not recommended as they scratch and dull the enamel.
If the holes are clogged, brush the caps using soapy water and dry with a clean cloth.
Take care when re-fitting the burner caps and the pan supports.
The burner caps are fitted with thumb indexes to receive the pan supports.
The re-fitting must be perfect because a bad positioning can bring serious anomalies in
the combustion.
The vitroceramic hob is slightly curved at the level of gas burners to drain the overflows far
from the flame and heating zones, and which permits an easy cleaning.
For the cleaning of the vitroceramic hob, see page 20.
_________________________________________________________________________________

SURFACE UNIT RADIANT HILIGHT

___________________________________________________________________________________________

SAFETY

------------
The hob is hot when in use. Hob temperatures increase. Surface temperatures are high so be
careful when touching the hob. Keep children away.
• Never cook directly on the glass ceramic hob. Always use cookware.
• Always place the pan on the centre of the unit you are cooking on.
• Do not use the surface as a cutting board.
• Do not slide cookware across the hob.
• Do not store heavy items above the hob. If they drop onto the hob, they can cause damage.
• Do not use the hob as a working surface.
• Do not use the hob for storage of any items.
• Aluminium foil and plastic pans mustn't be placed on heating zones.
• When cooking with fats or oils, never leave surface unit unattended. Overheated fats or oils
can quickly catch fire.
• In the unlikely event of a surface crack appearing, do not use the hob. Immediately disconnect
the hob from the electrical power supply and call the After Sales Service.

HOW TO OPERATE THE SURFACE UNIT :

---------------------------------------------------------------
• Locate the sign corresponding to the surface unit radiant hilight
front left (only VM 41 model)
18 -

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Vm 41

Tabla de contenido