Gas Connection - ROSIERES VG 40 Instrucciones De Instalación Y Empleo

___________________________________________________________________________
INSTALLATION - GAS CONNECTION
___________________________________________________________________________________
These technical instructions are specially for the installers.
This appliance is not connected to an evacuation system for residual products. It must be
installed according to outstanding installation rules. You will have specially to take care to the
rules for ventilation. The airflow necessary to the combustion must be 2 m
Before installation, check that local supply conditions, type and gas pressure are compatible
with the appliance.
GAS CONNECTION : it must be made according to the rules applied in the country where
installed. In any cases, install on the pipe of the gas supply a stop tap, a pressure cooker, or a
pressure reducer release for LPG. Only use taps, pressure-reducers and flexible pipes
according to the official trademark in the country where installed.
CONNECTION BY RIGID HOSE : fitting the appliance directly, connect to the threaded end
of the harness link.
CONNECTION BY RIGID HOSE WITH MECHANICAL NOZZLES : fitting the first on the
harness link, secondly on the stop tap of the pipe.
- We recommend this type of connection -
CONNECTION BY RUBBER FLEXIBLE PIPE :
Screw the standard butt corresponding to the gas type used that you will have got. Mount the
corresponding flexible on the butt and so on the pressure-reducer.
- We do not recommend this type of connection -
In any cases, check that there is a sealing gasket when all connections are made, control the
tightness with soaped water (control with flame is forbidden).
APPLIANCE IN THE FIXED KITCHEN UNITS
Butane Rigid - Flexible hose with mechanical nozzles (2) - Rubber flexible pipe (1) -
Propane Rigid - Flexible hose with mechanical nozzles (2) - Rubber flexible pipe (1) -
Natural gas Rigid - Flexible hose with mechanical nozzles (2) -
(1) provided that the flexible pipe can be visited overall length. Its length will not exceed
1,5 m. It will be fitted with clamping bands adjusted to the ends.
(2) provided that the flexible hose will be visited overall length.
(1) (2) The flexible pipes and flexible hoses with mechanical nozzles must be installed in such a
way that they must in no case be in contact with the flames, neither spoiled by the gas of
combustion nor by hot parts of appliances.
22 -
3
/h by kW of power.