Smoke hollow CG600S Manual Del Usuario página 13

Assembly
15
16
(M4x10) (D)
(M4 nut) (C)
Charcoal Tray
Linkage Assembly
Fig. 16A
Charcoal Tray
Linkage Rod
Fig. 16C
Attach the slotted adjustment
using (2) M6x15 screws
Slotted
Adjustment
Panel
Fig. 15
Fig. 17A
(M4x10) (D)
Charcoal Tray
Linkage Assembly
Step 15:
panel to the left front leg #4
(Fig. 15)
Step 16:
Insert the charcoal tray
linkage rod through the
adjustment panel.
(Fig. 16A)
Then insert the rod of the
charcoal tray lift assembly
through the hole in the
(Fig. 16B)
linkage assembly.
Insert bolt (M4x10) through
the hole in the charcoal tray
lift assembly and tighten
(Fig. 16C)
nut (M4 nut).
Fig. 16B
Charcoal Tray
Lift Assembly
13