Smoke hollow CG600S Manual Del Usuario página 15

Assembly
19
20
Step 20:
Attach cooking grid front frame with handle and (2) side frames
together using (2) M5x10 flat screws
front frame handle part
Attach (3) cooking grids and cooking grid rear frame to the side
frames using (2) M5x10 flat screws.
Note: The flat side of the cooking grids and the bevel of the frames should be
placed the same direction as shown in (Fig. 20B).
Place the cooking grid assembly onto the grill.
Note: The flat side of the cooking grids should be facing upward.
Charcoal Access
Door Handle
Fig. 19
(Fig. 20A)
You may have
A B
or . Assemble as shown.
(Fig. 20C)
Spring
Washer
Nut
Locking
Bracket
Washer
A-(2) M5x15
B-(2) M5
Flat Side
Step 19:
Attach charcoal
access door handles
and charcoal
access door locking
brackets to the door
using door handle
washers, #10 spring
washers, and M10
nuts as shown.
(Fig. 19)
Note:
Do not over tighten
the nuts, make
sure the handles
can be turned properly.
B
A
Fig. 20A
Fig. 20B
Bevel
Side
Fig. 20C
15