Figure 4. Printed Test Results: Battery And Soc - Midtronics PowerSensor MICRO740 Manual De Instrucciones

If you have enabled the optional upgrade and performed a Full
System Test, the last results for the Starting/Charging System test
are printed with the SOC Pack Test results. (See the "Upgrade"
option below.) Data are transmitted from the analyzer's top-mounted
infrared (IR) transmitter to the printer's IR receiver. To print, turn on
the printer and align the analyzer's transmitter with the printer's
receiver. Press and hold the MENU button. Select PRINT RESULTS
from the Option menu by pressing the ARROW buttons and pressing
ENTER. It will take about 30 seconds to print all test results, which
are displayed simultaneously on the screen.
Micro740 V1.0
(c) MIDTRONICS
SAT 10/17/02
04:01 PM
RATING:
500CCA
BATTERY
12.61V 700CCA
REPLACE BATTERY
SERIAL NUMBER
123456
BATTERY CODE
2FGK4-2UT86G
BATTERY
12.61V 700CCA
REPLACE BATTERY
SERIAL NUMBER
123457
BATTERY CODE
2FGK4-2UT96G
Continues with the results for all
batteries in memory (up to 6)
Results available with optional Starting/Charging System upgrade.
Figure 4. Printed test results: battery (right) and SOC
Micro740ES V1.0
(c) MIDTRONICS
SAT 10/17/02
LAST 3 OF VIN
SOC PACK TEST
1
PACK: 12.35V
LOW CHARGE
SOC PACK CODE
STARTER TEST
CRANKING VOLTAGE
2
NORMAL:
CHARGING TEST
LOAD OFF: 14.63V
LOAD ON: 14.60V
DIODE RIPPLE
- 11 -
04:01 PM
123
1234-0ABC
10.81V
NORMAL
NORMAL