Troubleshooting The Display - Midtronics PowerSensor MICRO740 Manual De Instrucciones

Analizador digital de batterías
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING THE DISPLAY

If the display does not turn on:
Check the connection to the vehicle battery or pack.
The vehicle battery may be too low to power the analyzer
(below 1 volt). Fully charge the battery and retest.
The analyzer's 9-volt battery may need to be replaced. Follow
the directions in "Replacing the Micro740 Battery" and replace
the 9-volt battery (alkaline recommended).
If the analyzer does not power on when you press and hold
the MENU button, replace the 9-volt battery.
If troubleshooting does not solve the problem, call
1-800-776-1995 to obtain service. See "Patents, Limited
Warranty, Service" for more information.
- 18 -

Publicidad

Tabla de contenido
loading

Tabla de contenido