Step 2: Deciding On The Installation Location; Step 3: Installing The Base Bracket On The Wall - Sony BRAVIA FW-85BZ35F Guia Del Usuario

Step 2: Deciding on the installation
location
1
Referring to the Monitor installation
dimensions table on page 16, decide on
the installation location.
Allow for suitable clearance between the
Monitor and the ceiling and protruding parts
of the wall as shown below.
Unit: mm
300
100
100
Never install the Monitor set as shown
below:
Air circulation is blocked.
Note
• If you intend to route the cables in the wall, make
a hole in the wall to insert the cables before
beginning the installation.
2
Referring to the Wall mounting
dimensions diagram on page 17,
determine the positions of the screws
for installing the Base Bracket.
WARNING
The wall that the Monitor will be mounted on
should be able to support a weight of at least
four times that of the Monitor (Refer to your
Monitor's instructions for its weight.).
Determine the strength of the wall the
Monitor will be mounted on. Reinforce the
wall sufficiently, if necessary.
100
Wall
Step 3: Installing the Base Bracket on
the wall
1
Secure the Base Bracket to the wall
using four or more 8 mm diameter or
equivalent screws (not supplied).
1
g
h
Base Bracket
2 Secure the Base Bracket and the
Mounting Hook on the wall using the
four or more 8 mm diameter or
equivalent screws (not supplied).
Select four screw holes with the
shown in the diagram below and tighten
the screws securely so that they will not
become loose.
Align the unit so that it is level.
Base Bracket
GB
d
Screw
(+BVST4 × 12)
Mounting
Hook
mark
11
GB