Sonoff DW2-RF Manual Del Usuario página 7

SONOFF TECHNOLOGIES CO., LTD.
3. Add sub-devices
Connect the Bridge before adding the sub-device.
Access the eWeLink APP and select the Bridge, tap "Add" to select the alarm, and a
"Beep" means the Bridge enters the pairing mode. Then seperate the magnet for
more than 20 mm from the transmitter until the LED indicator stays on for 1 to 2s,
and the pairing is complete when you hear "Beep Beep".
If the addition failed, move the sub-device closer to the Bridge and try again.
Install the device
1. Tear off the protective film of the 3M adhesive.
2. Try to align the mark line on the magnet with that on the transmitter during
installation.
3. Install them in the opening and closing area separately.
RF Bridge
Added:0
No remote yet, please add.
>
Add
>20mm
6
English