Important Safeguards - Hamilton Beach 56207 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or
injury to persons, including the following:
1. Read all instructions.
2. This appliance is not intended for use by persons (including
children) with reduced physical, sensory, or mental
capabilities, or lack of experience and knowledge, unless they
are closely supervised and instructed concerning use of the
appliance by a person responsible for their safety.
3. Close supervision is necessary when any appliance is used by
or near children. Children should be supervised to ensure that
they do not play with the appliance.
4. To protect against risk of electrical shock, do not put cord,
plug, base, or motor in water or other liquid.
5. Unplug cord from outlet when not in use, before putting on or
taking off parts, and before cleaning.
6. Avoid contact with moving parts.
7. Flashing light indicates ready to operate. Avoid contact with
blades.
8. Do not operate any appliance with a damaged supply cord or
plug, or after the appliance malfunctions or has been dropped
or damaged in any manner. Supply cord replacement and
repairs must be conducted by the manufacturer, its service
agent, or similarly qualified persons in order to avoid a hazard.
Call the provided customer service number for information on
examination, repair, or adjustment.
9. The use of attachments, including canning jars, not
recommended or sold by the appliance manufacturer may
cause a risk of injury to persons.
10. Do not use outdoors.
2

IMPORTANT SAFEGUARDS

11. Do not let cord hang over edge of table or counter or touch
hot surfaces, including stove.
12. Do not place on or near a hot gas or electric burner, or in a
heated oven.
13. Keep hands and utensils out of the jar and away from the
cutting blade, while blending or chopping food, to reduce the
risk of severe personal injury and/or damage to the blender
(attachments may not be provided with blender). A rubber
spatula may be used but only when blender is not running.
14. Blades are sharp; handle carefully—especially when
assembling, disassembling, or cleaning inside blender jar.
15. Do not use a broken, chipped, or cracked blender jar.
16. Do not use broken, cracked, or loose cutting blade assembly.
17. To reduce the risk of injury, never place cutting blade
assembly on base without jar properly attached.
18. Always operate blender with lid in place.
19. Be careful if hot liquid is poured into blender as it can be
ejected out of appliance due to sudden steaming.
20. When blending hot liquids, remove filler-cap and close
the edge cover opening intended for pouring. To prevent
possible burns: Do not exceed the 3-cup (710-ml) level. Hot
liquids may push off lid during blending; therefore, with the
protection of an oven mitt or thick towel, place one hand on
top of the lid, keep exposed skin away from the lid, and start
blending at lowest speed.
21. Ensure cutting blade assembly is tight and secure to jar. Injury
can result if moving blades accidentally become exposed.

Publicidad

Tabla de contenido
loading

Tabla de contenido