Using Your Blender - Hamilton Beach 56207 Manual Del Usuario

Using Your Blender

IMPORTANT: Your blender jar and cutting blade assembly are subject to wear during normal use. Always inspect jar for nicks, chips, or cracks.
Always inspect cutting blade assembly for broken, cracked, or loose blades. If jar or cutting blade assembly is damaged, do not use. Call our toll-free
customer service number to obtain replacement parts.
1. Rotate the collar clockwise
until tight.
2. Place blender jar on base.
5. Choose your desired speed.
Note when using PULSE, the
blender will only run when the
button is held down. Avoid
contact with blades or moving
parts.
3. Add ingredients to jar. Place lid
on jar. Plug into outlet.
4. Press the ON/OFF (I/ )
button. The ready light will
blink. Select cycle to activate
blender. The blender will not
operate unless the ON/OFF
(I/ ) button is pressed first.
6. The SMOOTHIE program
pulses to crush ice, switches to
LOW to mix, and then ramps to
HIGH for smoothness. After the
45-second cycle, the blender
will stop automatically.
5