A Nt + L Ev ( Ligh T E L E Ctric Ve Hicles ) C On Nect I V I Ty; 35 Err Ors D I Sp Lay - Orbea MAHLE EBIKEMOTION DONGLE ANT+LEV Manual Tecnico

24 | O R BEA
3. WH AT D EVI CE DO ES
MY BI CYC L E N E E D ?
Once determined that the X35 system on your bicycle is compatible with the installation of
the ANT+ LEV dongle or the Iwoc Trio+ remote, your Orbea bicycle model and therefore its
specific system configuration will determine what device must be used to give the system
ANT+ LEV connectivity:
- ANT+ LEV dongle: For Orbea ebikes that do not use the Iwoc Trio handle
bar remote.
Compatible models: Orbea Gain M and Gain D with road drop
handlebars with versions of the X35 system compatible with the
installation of the ANT+ LEV dongle.
- Iwoc Trio+ remote: For Orbea ebikes that use the Iwoc Trio handlebar
remote.
Compatible models: Orbea Gain F (Urban), Optima E and EMX24
with versions of the X35 system compatible with the installation
of the Iwoc Trio+ remote.
4 . C OMPATI BL E
COMP U TER U N I TS

A NT + L EV ( LIGH T E L E CTRIC VE HICLES ) C ON NECT I V I TY

The installation of the ANT+ LEV dongle or the Iwoc Trio+
remote provides the system with ANT+ LEV connectivity.
The head unit to be connected to the X35 system for the
display of the system data must be compatible with this
data transmission protocol. Not all ANT+ units on the mar-
ket are necessarily compatible with the LEV protocol.
The OC ANT+ LEV display unit is fully compatible with the
ANT+ LEV protocol and allows for the visualization of the
following X35 system data:
-Current speed.
-Internal X35 battery charge level.
-Total system odometry.
-Current assist level.
-System errors.
TECHN ICA L MAN UAL
The OC ANT+ LEV display unit also allows for the assist
levels to be changed from the unit itself.
Consult all the OC ANT+ LEV functions on the specific user
manual from our website.
WARNING: The system data and the specific functions
available on other ANT+ LEV units in the market will de-
pend on the characteristics of the connected head unit.
Consult with the compatible head unit manufacturer.
DONGL E ANT+ L EV, IWOC TRIO +MAHLE EBIKEMOTION®
CO M PAT IB L E H EA D U N I TS.
You can access the list of ANT+ LEV compatible head units
here: www.thisisant.com/directory
Select the option LEV Display in the Profiles section for a
complete list of the compatible devices.
X35 ERRORS DISPLAY
Through the ANT+ LEV connection, errors on the MAHLE
Ebikemotion® X35 system can be displayed on the com-
patible head units. If the system has recovered from a
previous error, this can also be displayed in the head unit.
- Errors in the X35 system: If there is an error code in the
system, this will be shown in the head unit by the generic
error code E255. All system error codes (regardless of the
specific error code in the system) will be shown by the
code E255 in the head unit. Connect the X35 system to
the MAHLE Ebikemotion® X35 mobile apps (User or Dealer
app) to access the system´s specific error code and the
diagnostics/repair method.
- Error recovery visualization: If the system has reco-
vered from an error, this will be shown in the compatible
head unit by the generic code E000 when the system is
switched on and paired with the display. The E000 code
will disappear after a few seconds. The system has no
errors.
O RBEA | 25
— Filter by LEV Display in the directory.