Device Installation; Technical Data; Ce Declaration Of Conformity - Fermax 5204 Manual De Instalador

Cod. 970094
3. D
EVICE INSTALLATION
KEY3-USB is a USB-HID (Human Interface Device Class) device and it's supported by 32bit and 64bit
versions of Windows 7, Windows VISTA, Windows XP and Windows 10. KEY3-USB doesn't require
dedicated drivers, it's handled by OS generic USB HID driver. You may connect the device directly to the PC
USB port, driver installation will start automatically.
Note: You should not disconnect a reader while the software working with it is being run. Violating this rule
usually causes that the application controlling the reader may hang up and you will have to terminate it by
using Windows Task Manager.
Programs provided by FERMAX (AC-MAX ST, AC-MAX HW) automatically detect that the KEY3-USB reader
and present it on the list of available devices.
The KEY3-USB reader can be connected directly to the PCs USB socket or using a cable with magnetic
stand provided together with the reader. Using this cable is convenient because when you use a magnetic
stand, the reader can be located at computer's case or any other metallic part of a desk or a table.
Optionally, the KEY3-USB can be connected to computer by other USB cable of a length not exceeding 5
meters. However any modifications of original USB cables are prohibited. The only acceptable way of
prolonging USB cables is by using original factory-made extension cables.
6. T
ECHNICAL DATA
Table 3 Technical Data
Power supply
Average current consumption
Cards
Reading distance
Reading time
Working temperature range
Relative humidity
Dimensions
Weight

CE DECLARATION OF CONFORMITY

Hereby, FERMAX ELECTRONICA, S.A.U., declares that this KEY3-USB Ref. 5204, is in
compliance with the essential requirements of Directive RED 2014/53/UE and Directive RoHS
2011/65/UE. See website www.fermax.com. FERMAX Avd. Tres Cruces, 133, 46017 Valencia,
Spain.
https://www.fermax.com/intl/en/pro/documents/technical-documentation/DT-13-declarations-of-
conformity.html
V12_20
5 VDC directly from the USB port
80 mA
13.56MHz ISO/IEC 14443A MIFARE® Classic
Up to 3 cm for MIFARE® Classic cards
(while in an optimal relative location to the reader)
~ 200 msec
+5...+45º C
0 – 95% (non-condensing)
88 x 30 x 12 mm with base 11,5 x 45 x 45 mm
~ 20g
7 | 20