Technical Data; Minimum Requirements; Software Installation - Fermax 5258 USERPLUS Manual De Instrucciones

Cod. 97851 V06_17
EN
This is a tabletop, installer code management tool. It is supplied with software for PCs and a USB communications cable.
FUNCTIONS:
- Installations management
- Configure products of the AXESKEY gamma

MINIMUM REQUIREMENTS

Supported OS:
Windows XP-SP3,
-
Windows Vista 32-SP1 / 64-SP1,
-
Windows 7 32/64,
-
Windows Server 2003 R2, 2008 y 2008 R2
-
Windows Server 2012
-
Windows 8, Windows 8.1
-
INSTALLATION

3.1 SOFTWARE INSTALLATION

Before installing the new software, you should make a security copy of your database.
Insert the USB memory stick inside a USB port. The Soft-USERPLUS setup application will then start automatically.
2. Enter the register code which is on the bottom part
of the USERPLUS.
The installation will be done automatically.
If you want to install another installation type, Server, Client or Mobile, open the help file in the USB stick "Help" and
follow the instructions of clause 3.1.
Ref. 5258 USERPLUS

TECHNICAL DATA

Frequency
Power supply
Power consumption
Radiated power
Working temperature
Watertightness
Dimensions
Hardware:
-
-
-
-
-
3
868,35MHz
USB
< 100mA
<25mW
-20ºC - +85ºC
IP20
150x120x45mm
Pentium 4
512 Mbytes of RAM
350 Mbytes of free hard drive
Free USB port
USERPLUS
2. Select the type of installation.
1247080/1.0