ELICA SNAP Manual De Instrucciones página 19

4.
DISCONNECT THE CONNECTION CABLE INSIDETHE AESTHETIC
COVER
EN
6. PREPARE WHAT IS NEEDED FOR FIXING THE APPLIANCE
6a. position the rear body on the
out-let hole
6
5.
DISCONNECT THE ELECTRIC CABLE SUPPLIED WITH THE APPLIANCE
5a.
unscrew the two screws
to the left
5b.
6b. use the rear body as a template 6c. drill the 4 holes in the wall,
to mark the fixing holes according to the marks, and insert
the anchors
7.
POSITION THE FRAME BEHIND THE REAR BODY AND INSERT
THE ELECTRIC CABLE INTO THE SPECIFIC HOLE
cut the clamp
frame
rear Body
electric Cable
8b. fix to the wall with the screws
8.
POSITION THE FRAME AND THE REAR BODY
9. CONNECT SNAP TO THE SELECTED CABLE
screws (x4)
8a.
EN
7