Teletext; Dvd Functions; Play/Pause - LEXIBOOK LCDDVD2TFFR Manual De Instrucciones

TV Mode
1. Press the INPUT button on the remote control, then use the▲ and▼ buttons to set the video source to
"TV", and press ENTER to confirm.
2. Press once the Previous/TEXT button to display the teletext index. Press the same button once
again to display the teletext index while continuing to view the current program.
3. Use the number keys to enter the number of the desired page or use the quick access keys (RED,
GREEN, YELLOW and BLUE buttons on the remote control) corresponding to the colored text at the
bottom of the page.
4. To increase the text size or display the upper part of the page, press the Forward scan/SIZE button.
Press the same button once again to display the lower part of the page.
5. To freeze the current page, press the Next/HOLD page. Press the same button once again to exit the
function.
6. To reveal hidden texts (e.g. answers to a quiz), press the ANGLE/REVEAL button. Press the same
button once again to exit the function.
7. To access a subpage of the current page, press the ZOOM/SUBPAGE button. Press the same button
once again to exit the function.
8. To access or go back to the main index, press the Reverse scan/INDEX button.
Note: You may exit the Teletext function at any time by pressing the DVD SETUP/EXIT button.
DTV Mode
1. Press the INPUT button on the remote control, then use the▲ and▼ buttons to set the video source to
"DTV", and press ENTER to confirm.
2. Press once the Previous/TEXT button to display the teletext index of the current program. The
program stays displayed in a small window on the left of the screen, and the index is displayed on the
right.
3. Use the ▲ and ▼buttons to select the desired issue and press ENTER to confirm. Use the same
buttons to select a "sub-index".
4. If there is more than one page, use the ◄ and ► to access the previous or following page.
5. You may press the Previous/TEXT button at any time to go back to the current program.
Switch ON the DVD player
1. Press the POWER button on the LCD display or the STANDBY
switch on the TV set.
2. The power indicator turns green and after a few seconds, the LCD screen will light up.
3. Press the INPUT button on the remote control, then use the ▲ and ▼buttons to set the video source
to "DVD", and press ENTER to finish.
Load/eject a disc
1. Insert a disc in the disc slot with the label facing towards the front panel of the LCD screen. After a few
seconds it will start playing automatically. If it is a DVD disc, the Menu/Title page will be displayed. If it is
a CD, the first track will play automatically.
2. To eject the disc, press the EJECT key on the LCD screen or on the remote control.
Note:
• Hold the disc without touching either of its surfaces.
• Some discs may not start automatically. In that case, press the
remote control.
• Make sure to insert the disc with the printed side facing the front of the LCD screen. Otherwise, you
may damage the DVD mechanism.

Play/pause

1. During playback, press the
2. Press once again to resume playback.
WARNING: the Pause function may cause permanent damage to the LCD screen. Do not display still
images for a long moment.
36
TELETEXTE

DVD FUNCTIONS

key on the LCD screen or on the remote control to pause the playback.
button on the remote control to
key on the LCD screen or on the