Troubleshooting - LEXIBOOK LCDDVD2TFFR Manual De Instrucciones

Problem
No sound and no picture - Check that the main plug is connected to an outlet.
- Check that the unit has been switched on by pressing the POWER button of the
LCD display or the STANDBY button of the remote control.
- Check the brightness and contrast settings.
Normal picture but no - Sound level may be too low or muted, increase the sound level.
sound - Try other channels.
- Make sure the audio cables are properly connected.
The remote control - Make sure there are no obstacles between the LCD screen and the remote
doesn't operate properly control.
- Check if the batteries were installed according to the polarity (+/- signs).
- Try to install new batteries.
The power indicator is Check if the "Key Lock" function is deactivated and switch on the LCD display
on but the buttons of the with the remote control.
LCD display do not work.
The power indicator is Wrong mode, select the "TV" or "DTV" mode.
green but there is no
image.
No image, blue screen - Check the antenna connection.
- No channel is preset, start an automatic search.
No picture, low quality - Try to adjust the colour setting in the video menu.
picture, low quality - Try other channels.
colour - Make sure the video cables are properly connected.
Picture with snow/noise - Make sure there are no electronic appliances near the LCD screen. They could
cause interferences.
- Check the antenna connection.
You forgot or you lost - In TV mode, enter 4711.
your PIN code.
No audio output from - Try to adjust the audio balance in the audio menu.
one of the speakers

TROUBLESHOOTING

Solution
41