Kenmore 116.32728 Manual Del Propietário página 19

TO CLEAN AGITATOR
Note: In order to keep cleaning efficiency
high and to prevent damage to your vacu-
um, the agitator must be cleaned every time
the belt is changed,.
The agitator must be cleaned according to
the following schedule:
Vacuum Use Clean Agitator
HEAVY every week
(used daily)
MODERATE
(used 2-3 times/week)
every month
LIGHT
(used t timetweek)
every 2 months
Remove any dirt or debris in the belt path
area or in the agitator area..
Exploded View - Agitator
Assembly
End
Agitator Unit
End
Washer
\
End Cap
Carefully remove
the brush end
caps and remove
any string or
debris located on
the agitator
assembly, end
caps or agitator
shall
Note: Replace the end caps. See the
exploded view for correct assembly.,
TO REPLACE BELT
Make sure that the carpet/bare floor selec-
tor is in the carpet position.
Loop the new belt on the motor shaft°
Motor
Shaft
Belt New
Pulley Belt
Carpet/Bare Floor
Selector Shaft
BELT ROUTING
Correct Routing of Belt
(Selector in Carpet Position)
Carpet/Bare Floor Shaft
Selector Shaft
Incorrect Routing of Belt
(Belt on Selector Shaft)
__l f'_?!}:': _Fl°°r Pedal
Carpet/Bare Floor Shaft
Selector Shaft
Incorrect Routing of Belt
(Selector in Bare Floor Position)
Agitator Bett Carpet/Bare Floor
Selector Shaft
19