Kenmore 116.32728 Manual Del Propietário página 21

Always follow all safety precautions when
cleaning and servicing the vacuum cleaner.
WARNING
Electrical Shock Or Personal injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly starting.
If the cleaner does not seem to have ade-
quate suction, first check if the dust bin is
full or if a filter is clogged. See DUST BIN
CLEANING and FILTER CHANGING.
tf the dust bin and filter areas are free of
clogs, check the hose area. Remove the
lower end of the stretch hose from the
cleaner by grasping the hose collar, twisting,
and pulling straight out_
Plug in the
vacuum and
turn it on.
Stretch the
hose to max-
imum length
and then
allow the
hose to
return to its
Stretch
storage
Hose tn
length.
and
Out Turn the unit
off and
unplug the
unit..
Visually inspect the hose and the base area
into which the hose is inserted
Remove any visible clog.
Re-insert the hose into the opening on the
lower body from which it was removed_
Press firmly to assure connection.
Stretch
Hose
Hose
Col/ar
WARNING .....
Personal injury Hazard
DO NOT place hands or feet under-
neath the unit at any time.The agita-
tor will be revolving rapidly when
the vacuum is turned on and is in
the carpet setting,
If the dust bin and filter areas and the hose
areas are free of clogs, check the nozzle
area_ To check this area, see the section on
BELT CHANGING AND AGITATOR CLEAN-
ING.
Return the cleaner to the upright position
before plugging into an electrical outlet.
21