geberit 690.254.00.1 Instrucciones De Uso página 28

EN
5
After the pressing procedure, check that the Geberit
pressing jaw is fully closed.
6
Push the ends of the jaw levers together and remove the
Geberit pressing jaw from the Geberit pressfitting. Check the
pressing contour.
If a press connection has not been completely pressed – in
the event of a power cut, for example – it must be pressed
again. Corrective pressing is performed in the same way as
a normal pressing operation. Depending on the state of the
preliminary pressing, there may be considerable idle stroke
before the pressing tool engages during corrective pressing.
28
18014400957393291-1 © 11-2017
967.763.00.0 (01)