PRASTEL EASYBKA Manual De Instrucciones página 44

EASYBKA - EASYBKR
When the first user is added to the controller, the default Auxiliary Code will
automatically be deleted, ready for a new Auxiliary Code to be re-entered.
1. Enter Programming Mode.
2. Press "2" to enter Menu 2. The
Mode LED will turn orange.
Insert the new "Auxiliary Code".
3.
4. The EASYBKA/R returns to
Normal Mode: you will hear
three beeps. The Door LED will
turn off and the Mode LED will
turn green.
NOTE

Auxiliary Code does not
work in Secure Mode and
only works when the Auxiliary Mode is 0, 1, 8 or 9.

Code 0000 will erase and deactivate the Auxiliary Code.
12. Changing the Programming Code
1. Enter Programming Mode.
2. Press "3" to enter Menu 3: the Mode
LED will turn green.
Insert the new "Programming Code".
3.
4. The EASYBKA/R returns to Normal
Mode: the Door LED will turn off and
the Mode LED will turn green.
NOTE

Programming Code cannot be erased, i.e. the code 0000 is not
valid and will not erase the Programming Code.
ENGLISH
ORANGE
44
ISEASYBK_08_18.pdf.docx
GREEN
GREEN
GREEN
GREEN
GREEN GREEN
GREEN