PRASTEL EASYBKA Manual De Instrucciones página 51

EASYBKA - EASYBKR
17.2 Enrolling Secondary Codes using the Code Search
Method
1. Enter Programming Mode
2. Press "7" to enter Menu 7: the
Door LED will turn Orange
3. Enter the 3-digit User Slot number
000, the Door LED will flash
Orange: the controller is now
waiting for the Primary Code of
the User you want to add a
Secondary Code to.
4. Enter the 4 Digit PIN Code of the
Primary Code: the Mode LED will
flash red (If the Primary Code
entered is not valid, you will hear a
long beep and the EASYBKA/R
will continue to wait for a valid Primary Code).
5. Enter the 4-digit PIN Code to be used as the Secondary Code., If
the Secondary Code is valid the controller will beep three times
and return to Normal Mode. (If the Secondary Code is invalid the
controller will make a long beep and then the EASYBKA/R will
continue to wait for a valid Secondary code to be entered).
18. Deleting Primary & Secondary Codes
There are two methods to delete Primary and Secondary codes, the
Standard Method and the Code Search Method. When deleting a User
Slot, both the Primary Code and the Secondary code are erased.
ENGLISH
51
ISEASYBK_08_18.pdf.docx
GREEN
ORANGE
ORANGE
RED ORANGE