Installation In A Dimplex Mantel - Dimplex BLF5051 Manual Del Usuario

Fireplace Installation
3. Lift the fireplace and insert into the
opening. The fireplace's mounting
trim should be flush against the
wall (Figure 13).
4. Use the supplied bubble level
to level the fireplace within the
framing. Adjust as required.
5. Drive four supplied mounting
screws through the four mounting
holes located on the inside surface
of the fireplace chassis, into wall
studs (Figure 13).
6. Refer to Front Glass Installation
section for final installation
procedures.
Figure 13
Wall
surface
Mounting hole
Mounting hole
Installation in a Dimplex
Media Console
1. Insert the fireplace into the
opening of the media console from
the front.
2. Drive four supplied mounting
screws through the four mounting
holes located on the inside surface
of the fireplace chassis, into the
walls of the media console.
3. Refer to Front Glass Installation
section for final installation
procedures.
15