English; Technical Data; Care And Maintenance - Roto ZJM 6 H/K Serie Manual Del Usuario

English

General safety instructions
• Read this manual carefully before installing and op-
erating the device and follow all instructions.
• Ensure that this manual is accessible to all users.
• Keep this manual in a safe place until you dispose of
the product.
• If the product changes hands, pass this manual on to
the new owner.
Intended use
The venetian blind is intended for inside installation
and protects against heat and sunlight.
It may only be installed and used on Roto skylight
types designed for its use.
The venetian blind reflects and absorbs a large portion
of solar radiation, but does not offer full protection
against sunlight and heat (in a physical sense).

Technical data

The dimensions depend on the type and size of the
window.
Unpacking/checking the scope of delivery
(Fig. A1-A2)
⚠
Risk of suffocation!
Plastic parts, polystyrene, screws, small
parts, etc., can be very dangerous for children
to play with.
> Do not leave the packaging material and installa-
tion parts lying around, and keep away from chil-
dren and toddlers.
> Keep children away from the installation site
throughout the installation procedure.
• Please dispose of the packaging material (cardboard,
polystyrene, plastic bag) according to local regula-
tions.
• Please check the scope of delivery. If parts are missing,
consult a dealer.
• The screwing aid (Fig. A2, part K) is a tool and not
an installable part.
4
Preparing tools/aids
(Fig. A3)
• Cross-head screwdriver, PZ1
• If needed: stable climbing equipment (step ladder)
• Screwing aid (Fig. A2, part K)
Installation
(Fig. 1-4)
⚠
Risk of falling!
> Do not lean out of the skylight.
> Only use climbing equipment that is resting on a
solid foundation and that offers good support and
high carrying capacity.
⚠
Risk of injury from falling components!
> To mount the product, only use fixing materials
that were included in the delivery and that are
suitable for the window frame material.
> Never place tools, components and fixing materi-
als on the climbing equipment.
> Keep children away from the installation site
throughout the installation procedure.
Settings
(Fig. 5)
Settings are not required after installation. The cord
tension is preadjusted at the factory.
If the handle rail of the venetian blind is not parallel to
the cassette, the handle rail must be aligned once:
• Open the handle rail fully (slide it toward the cassette)
and then close it completely.
Operation
(Fig. 6)
• Hold the venetian blind at the centre of the handle
and slide it to the desired position.
It stops in any position.
• Adjust the slats using the tilt button.

Care and maintenance

To ensure a long life, we recommend cleaning the alu-
minium surface of the product at least once a year.
• Wipe the aluminium surface with a moist cloth only.
• Carefully brush off the slats.